Ciao-users

ciao-users@cliplab.org

948 discussions

Call for Papers: 23rd Symposium on Logic-based Programming Synthesis and Transformation
by Gopal Gupta 26 May '13

26 May '13

Paper submission deadline is June 11, 2013. ============================================================ LOPSTR'13 23rd International Symposium on Logic-Based Program Synthesis and Transformation LOPSTR 2013 http://www.utdallas.edu/~gupta/lopstr Madrid, Spain, September 18-20, 2013 DEADLINES Abstract submission: June 4, 2013 Paper submission: June 11, 2013 ============================================================ The aim of the LOPSTR series is to stimulate and promote international research and collaboration on logic-based program development. LOPSTR is open to contributions in logic-based program development in any language paradigm. LOPSTR has a reputation for being a lively, friendly forum for presenting and discussing work in progress. Formal proceedings are produced only after the symposium so that authors can incorporate this feedback in the published papers. The 23rd International Symposium on Logic-based Program Synthesis and Transformation (LOPSTR 2013) will be held in Madrid, Spain; previous symposia were held in Leuven, Hagenberg, Coimbra, Valencia, Lyngby, Venice, London, Verona, Uppsala, Madrid, Paphos, London, Venice, Manchester, Leuven, Stockholm, Arnhem, Pisa, Louvain-la-Neuve, Manchester and Odense (you might have a look at the contents of past LOPSTR symposia). LOPSTR 2013 will be co-located with PPDP 2013 (International ACM SIGPLAN Symposium on Principles and Practice of Declarative Programming). Topics of interest cover all aspects of logic-based program development, all stages of the software life cycle, and issues of both programming-in-the-small and programming-in-the-large. Both full papers and extended abstracts describing applications in these areas are especially welcome. Contributions are welcome on all aspects of logic-based program development, including, but not limited to: * specification * verification * analysis * specialization * composition * certification * transformational techniques in SE * synthesis * transformation * optimisation * inversion * program/model manipulation * security * applications and tools Survey papers, that present some aspect of the above topics from a new perspective, and application papers, that describe experience with industrial applications, are also welcome. Papers must describe original work, be written and presented in English, and must not substantially overlap with papers that have been published or that are simultaneously submitted to a journal, conference, or workshop with refereed proceedings. Work that already appeared in unpublished or informally published workshop proceedings may be submitted (please contact the PC chair in case of questions). Proceedings The formal post-conference proceedings will be published by Springer in the Lecture Notes in Computer Science series. Important Dates Abstract submission: June 4, 2013 Paper submission: June 11, 2013 Notification (for pre-proceedings): July 20, 2013 Camera-ready (for pre-proceedings): July 27, 2013 Symposium: September 18-20, 2013 Submissions must be formatted in the Lecture Notes in Computer Science style. They cannot exceed 15 pages including references but excluding well-marked appendices not intended for publication. Referees are not required to read the appendices, and thus papers should be intelligible without them. Full papers can be directly accepted for publication in the formal proceedings to be published by Springer in the LNCS series or accepted only for presentation at the symposium. After the symposium, all authors of extended abstracts and full papers accepted only for presentation will be invited to revise and/or extend their submissions in the light of the feedback solicited at the symposium. Then, after another round of reviewing, these revised papers may also be published in the formal proceedings. Authors should submit an electronic copy of the paper (written in English) in PDF or Postscript (Level 2). Each submission must include on its first page the paper title; authors and their affiliations; contact author's email; abstract; and three to four keywords. The keywords will be used to assist us in selecting appropriate reviewers for the paper. If electronic submission is impossible, please contact the program chair for information on how to submit hard copies. Papers should be submitted to the submission website for LOPSTR 2013. Program Committee Salvador Abreu Universidade de Evora and CENTRIA Elvira Albert Complutense University of Madrid, Spain Sergio Antoy Portland State University, US Henning Christiansen Roskilde University, Denmark Hai Feng Guo University of Nebraska at Omaha Gopal Gupta University of Texas at Dallas (Program Chair) Manuel Hermenegildo T.U. Madrid and IMDEA Software Research Institute Jacob Howe City University Patricia Hill University of Parma Michael Leuschel University of D??sseldorf Paulo Moura Universidade da Beira Interior, Portugal Ricardo Pe??a Universidad Complutense de Madrid Enrico Pontelli New Mexico State University I. V. Ramakrishnan SUNY Stony Brook Neda Saeedloei University of Texas at Dallas Hirohisa Seki Nagoya Institute of Technology Paul Tarau University of North Texas Neng-Fa Zhou CUNY Brooklyn College and Graduate Center Program Chair: Gopal Gupta Department of Computer Science The University of Texas at Dallas USA Symposium Chair Ricardo Pena Facultad de Informatics Universidad Complutense de Madrid 28040 Madrid, Spain

1 0

call/n Argument Order
by Jan Burse 12 May '13

12 May '13

Dear All, I am using the following directive: ?- use_module(engine(hiord_rt)). I am expecting that I will then have call/n available as defined in the ISO TC2. But it seems that the arguments are not appended, but something else happens. I get: ?- call(f(p,q),r,s,t). 1 1 Call: user:f(r,p,q,s,t) ? But I would expect: ?- call(f(p,q),r,s,t). 1 1 Call: user:f(p,q,r,s,t) ? Bug or feature? Bye

2 1

Indirect predicate
by John McCulloch 10 May '13

10 May '13

I have code with a construct that appears repeatedly with only a small difference consisting of a different predicate call each time. I want to create a predicate that can take a predicate as an argument. Here is the generic predicate: array_def (_,[],[]) :- !. array_def(Type,[H|T],[H0|T0]) :- !,Type(H,H0), array_def(T,T0). array_def(Type,H,[H0]) :- Type(H,H0). Type is a variable predicate where H is an input and H0 is an output. An example is: value_literal(H,H0) :- number_literal(H,H0), !. value_literal(H,H0) :- string_literal(H,H0), !. value_literal(H,H0) :- boolean_literal(H,H0). So I want to declare something like this: value_literal_array(Arr,Arr0) :- array_def(value_literal(...,...),Arr,Arr0), ... I don't understand the description of call/2 in the manual. Is there a way to use that? If so, how? If not, how else can I do this? How would I include it in array_def and how would I Thanks, John -- View this message in context: http://old.nabble.com/Indirect-predicate-tp35368200p35368200.html Sent from the Ciao Prolog - Users mailing list archive at Nabble.com.

2 1

PPDP 2013: 2nd Call for Papers
by Tom Schrijvers 07 May '13

07 May '13

===================================================================== 2nd Call for papers 15th International Symposium on Principles and Practice of Declarative Programming PPDP 2013 Special Issue of Science of Computer Programming (SCP) Madrid, Spain, September 16-18, 2013 (co-located with LOPSTR 2013) http://users.ugent.be/~tschrijv/PPDP2013/ ====================================================================== EXTENDED SUBMISSION DEADLINE: JUNE 13, 2013 PPDP 2013 is a forum that brings together researchers from the declarative programming communities, including those working in the logic, constraint and functional programming paradigms, but also embracing a variety of other paradigms such as visual programming, executable specification languages, database languages, and knowledge representation languages. The goal is to stimulate research in the use of logical formalisms and methods for specifying, performing, and analysing computations, including mechanisms for mobility, modularity, concurrency, object-orientation, security, verification and static analysis. Papers related to the use of declarative paradigms and tools in industry and education are especially solicited. Topics of interest include, but are not limited to: * Functional programming * Logic programming * Answer-set programming * Functional-logic programming * Declarative visual languages * Constraint Handling Rules * Parallel implementation and concurrency * Monads, type classes and dependent type systems * Declarative domain-specific languages * Termination, resource analysis and the verification of declarative programs * Transformation and partial evaluation of declarative languages * Language extensions for security and tabulation * Probabilistic modelling in a declarative language and modelling reactivity * Memory management and the implementation of declarative systems * Practical experiences and industrial application This year the conference will be co-located with the 23nd International Symposium on Logic-Based Program Synthesis and Transformation (LOPSTR 2013) and held in cooperation with ACM SIGPLAN. The conference will be held in Madrid, Spain. Previous symposia were held at Leuven (Belgium), Odense (Denmark), Hagenberg (Austria), Coimbra (Portugal), Valencia (Spain), Wroclaw (Poland), Venice (Italy), Lisboa (Portugal), Verona (Italy), Uppsala (Sweden), Pittsburgh (USA), Florence (Italy), Montreal (Canada), and Paris (France). Papers must describe original work, be written and presented in English, and must not substantially overlap with papers that have been published or that are simultaneously submitted to a journal, conference, or workshop with refereed proceedings. Work that already appeared in unpublished or informally published workshop proceedings may be submitted (please contact the PC chair in case of questions). Proceedings will be published in the ACM International Conference Proceedings Series. After the symposium, a selection of the best papers will be invited to extend their submissions in the light of the feedback solicited at the symposium. The papers are expected to include at least 30% extra material over and above the PPDP version. Then, after another round of reviewing, these revised papers will be published in a special issue of SCP with a target publication date by Elsevier of 2014. Important Dates Abstract Submission: June 10, 2013 Paper submission: June 13, 2013 Notification: July 18, 2013 Camera-ready: August 4, 2013 Symposium: September 16-18, 2013 Invites for SCP: October 2, 2013 Submission of SCP: December 11, 2013 Notification from SCP: February 22, 2014 Camera-ready for SCP: March 14, 2014 Authors should submit an electronic copy of the paper (written in English) in PDF. Each submission must include on its first page the paper title; authors and their affiliations; abstract; and three to four keywords. The keywords will be used to assist us in selecting appropriate reviewers for the paper. Papers should consist of no more than 12 pages, formatted following the ACM SIG proceedings template (option 1). The 12 page limit must include references but excludes well-marked appendices not intended for publication. Referees are not required to read the appendices, and thus papers should be intelligible without them. Program Committee Sergio Antoy Portland State University, USA Manuel Carro IMDEA Software Institute, Spain Iliano Cervesato Carnegie Mellon University, Qatar Agostino Dovier Universita degli Studi di Udine, Italy Maria Garcia de la Banda Monash University, Australia Ralf Hinze University of Oxford, UK Yukiyoshi Kameyama University of Tsukuba, Japan Oleg Kiselyov USA Yanhong Annie Liu State University of New York at Stony Brook, USA Stefan Monnier Universite de Montreal, Canada Alan Mycroft University of Cambrige, UK Bruno C. d. S. Oliveira National University of Singapore, Singapore Alberto Pettorossi Universita di Roma Tor Vergata, Italy Enrico Pontelli New Mexico State University, USA Kristoffer Rose IBM Research, USA Sukyoung Ryu KAIST, South Korea Vitor Santos Costa University of Porto, Portugal Torsten Schaub University Potsdam, Germany Tom Schrijvers Ghent University, Belgium Martin Sulzmann Hochschule Karlsruhe, Germany Wouter Swierstra Universiteit Utrecht, The Netherlands Tarmo Uustalu Institute of Cybernetics, Estonia Janis Voigtlaender University of Bonn, Germany Meng Wang Chalmers University of Technology, Sweden Jan Wielemaker Universiteit van Amsterdam, The Netherlands Program Chair Tom Schrijvers Department of Applied Mathematics and Computer Science Ghent University 9000 Gent, Belgium General Chair Ricardo Pena Facultad de Informatica Universidad Complutense de Madrid 28040 Madrid, Spain

1 0

WLPE 2013 - First Call For Papers
by Jose F. Morales 07 May '13

07 May '13

(apologies for multiple copies) ----------------------------------------------------------- WLPE 2013 - CALL FOR PAPERS Workshop on Logic-based Methods in Programming Environments (satellite workshop of ICLP 2013) 24-25 August 2013 Istanbul, Turkey http://clip.dia.fi.upm.es/Conferences/WLPE13/ ----------------------------------------------------------- The workshop aims at providing an informal meeting for researchers working on logic-based tools for development and analysis of programs. In addition to papers describing more conceptual work on environmental tools, we solicit papers describing the implementation of and experimentation with such tools. We hope to attain the same friendly atmosphere as in past workshops, which enabled fruitful exchanges leading to joint research and subsequent publications. Areas particularly relevant to the workshop include: * static and dynamic analysis * debugging and testing * program verification and validation * code generation from specifications * termination and non-termination analysis * reasoning on occurs-check freeness and determinacy * frameworks and resources for sharing in the logic programming community * profiling and performance analysis * type- and mode analysis * shape, point-to and escape analysis * module systems * optimization tools * program understanding * refactoring * logical meta-languages Note that this list is not exhaustive and, if you are interested in taking part in the workshop but unsure if your work falls within its scope, do contact the organisers who will be happy to advise. The 23rd Workshop on Logic-based methods in Programming Environments will take place in Istanbul, Turkey, as a satellite workshop of ICLP 2013, the 29th International Conference on Logic Programming. This workshop will continue the series of successful international workshops on logic programming environments held in Ohio, USA (1989), Eilat, Israel (1990), Paris, France (1991), Washington, USA (1992), Vancouver, Canada (1993), Santa Margherita Ligure, Italy (1994), Portland, USA (1995), Leuven, Belgium and Port Jefferson, USA (1997), Las Cruces, USA (1999), Paphos, Cyprus (2001), Copenhagen, Denmark (2002), Mumbai, India (2003), Saint Malo, France (2004), Sitges, Spain (2005), Seattle, Washington USA (2006), Porto, Portugal (2007), Udine, Italy (2008), Pasadena, USA (2009), Edinburgh, UK (2010), Lexington, USA (2011), and Budapest, Hungary (2012). Submission guidelines --------------------- We encourage the submission of original research in the area as well as relevant results that have been submitted, rejected, or accepted elsewhere as long as they are relevant for the WLPE community. All papers must be written in English and should not exceed 15 pages. We welcome also shorter submissions, e.g., extended abstracts and short papers, of at least 3 pages. Submissions must be made in Springer's LNCS format via the page: https://www.easychair.org/conferences/?conf=wlpe2013 An informal proceedings will be distributed electronically at the workshop. After the workshop, the proceedings will be publicly available on-line in the Computing Research Repository (CoRR). Important dates --------------- Submission: June 3, 2013 Notification: June 24, 2013 Camera-ready: July 15, 2013 Workshop: August 24-25, 2013 Program committee ----------------- Salvador Abreu Universidade de Evora, Portugal Michael Codish Ben Gurion University, Israel John Gallagher Roskilde University, Denmark Remy Haemmerle Universidad Politecnica de Madrid, Spain Jacob Howe City University London, UK Jose F. Morales IMDEA Software Institute, Spain Vitor Santos Costa Universidade do Porto, Portugal Peter Schneider-Kamp University of Southern Denmark, Denmark Sylvain Soliman Inria Paris-Rocquencourt, France Terrance Swift New University of Lisboa, Portugal Win Vanhoof University of Namur, Belgium Alicia Villanueva Universitat Politecnica de Valencia, Spain Workshop organizers ------------------- Jose F. Morales IMDEA Software Institute Madrid, Spain Email: wlpe13(a)clip.dia.fi.upm.es Remy Haemmerle Universidad Politecnica de Madrid Madrid, Spain Email: wlpe13(a)clip.dia.fi.upm.es

1 0

Prolog to Java Interface?
by Ed Freeman 03 May '13

03 May '13

Hello: Other than the prolog code for the calculator, are there other code examples available for using the Prolog to Java interface? Thanks… -ED-

1 0

Where is ciaopp?
by Bambang Purnomosidi D P 28 Apr '13

28 Apr '13

Hello, I tried to compile CiaoDE dev version (CiaoDE 1.15-1712-ga8c821b) but could not get ciaopp. This is the error: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./ciaosetup: line 559: cd: /home/bpdp/master/prolog/ciao/development/source-code/CiaoDE-1.15-1712-ga8c821b/ciaopp: No such file or directory ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ It looks like the process could not find ciaopp dir (which is not exist). I tried to find the ciaopp source code anywhere (the ciaopp dir) to no avail. I use Linux: $ uname -a Linux bpdp-arch 3.8.10-1-ARCH #1 SMP PREEMPT Sat Apr 27 09:58:28 CEST 2013 i686 GNU/Linux $ Any hints? Thanks. -- http://bpdp.name Key server hkp://pgp.mit.edu ID 0x46094339

1 0

Re: [Ciao-users] Emacs versions
by Travis Johnson 26 Apr '13

26 Apr '13

I know this thread is a couple months old, but thought I would let everyone know... I too was getting errors about Emacs not being installed (even though it was, in fact, installed) with the stable CiaoDE 1.14.2 release. I downloaded the latest development version, CiaoDE 1.15-1712-ga8c821b, and it installed and downloaded/installed Emacs and both are working for Prolog (though not the Java integration.) This is on a 64bit Windows 7 PC.

1 0

Troubles running java samples
by Travis Johnson 25 Apr '13

25 Apr '13

I initially downloaded the "stable" release for Windows, CiaoDE-1.14.2-13646.exe... but had considerable problems getting Emacs (and other aspects running properly.) I downloaded and installed CiaoDE-1.15-1712-ga8c821b.exe and it appears to be running well generally. I am able to run a handful of the examples in CiaoDE\ciao\examples\misc (I haven't tried them all, but the suduko and bignums both worked without issue in Emacs.) However, I am unable to run the agenda sample (CiaoDE\ciao\examples\agenda). When I click "(Re)Load buffer into top level", I am presented with the Ciao command interface below in Emacs, but I also see the following error message, "(Dynamic link failed)". If I try starting the program, I am given the following error... "?- main. Error: Could not find or load main class CiaoJava.PLJavaServer {ERROR: sockets:connect_to_socket/3 - existence error: procedure:sockets:connect_to_socket/3 does not exist} no" I am given the same error upon loading the calculator sample from CiaoDE\ciao\library\javall\examples\pl2java. What am I doing wrong?

1 0

ANN: VivoMind Prolog Unicode Resources released
by Paulo Moura 25 Apr '13

25 Apr '13

Hi, The Prolog Unicode 6.2 resources developed by VivoMind LLC are now available as public domain software at: https://github.com/VivoMind The VivoMind Prolog Unicode Resources are a set of plain Prolog files resulting from the conversion of most (but not all) official UCD 6.1 files and updated for the changes in the 6.2 standard. A set of auxiliary predicates is also included to simplify using the provided tables of code point properties. Some of the original data was split in individual files per code point property to make it easier to load only the resources required by a specific application. Enjoy, Arun Majumdar Paulo Moura

1 0

← Newer
1
...
13
14
15
16
17
18
19
...
95
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

Ciao-users